ISO 9001:2015 certified. Manufacturer, supplier and lining contractor. +91 70140 37172jmd@jispl.net@jmd.jispl

Home / Blog / Anti-corrosion

Anti-corrosion

Acid and chemical tanks: why the tank and its lining should come from one party

JISPL teamOctober 20266 min read

Many acid and chemical tank failures start at the joint between two contracts: one party fabricates the shell and another lines it. When the lining fails, each blames the other. Planning the tank and its lining together avoids most of these problems.

Start with the contents

  • The chemical and its concentration
  • Operating temperature, and any temperature swings
  • Whether the tank is for storage, reaction or pickling
  • Agitation, abrasion or solids in the liquid

Choosing the tank material

Stainless steel is suitable for some chemicals on its own. For aggressive chemicals such as many dilute acids, or where temperatures are high, a mild steel or concrete tank with an acid-resistant lining is often the more reliable and economical option. The right choice comes from the chemical list, not from habit.

Designing the shell for lining

  • Smooth, continuous welds, ground flush where the lining will sit
  • Rounded internal corners rather than sharp edges
  • Nozzles and manholes sized and placed so the lining can be done properly
  • A rigid shell that does not flex and crack the lining
  • Surface preparation to the standard the lining system requires

The lining system

A typical acid-resistant lining combines an impervious membrane with acid-resistant bricks or tiles set in a chemical-resistant mortar such as potassium silicate, furan, phenolic or epoxy. The mortar must suit the chemical, because joints are usually where the attack begins.

Before first fill

The shell should be leak tested before lining, and the lining cured as its mortar system requires before the tank is filled. Cutting the curing time short is a common reason new linings fail early.

JISPL fabricates MS and SS tanks at our associated workshops and lines them with acid-resistant brick or tile using our own crews, so one order covers both the shell and the lining.

Need help with this on your plant?

Send us the details and get a quick quotation or a site visit.

Talk to us

Need material, equipment or a lining job?

Send the grade and quantity for rates, or a drawing, BOQ or photo for a job or equipment quotation. We reply with a quick quotation.

Quick quote

Tell us what you need

Enter your name.
Enter a valid phone number.

We reply quickly. Your details are used only to answer your enquiry.

WhatsApp