In a fluidised bed boiler, the bed is a hot, moving layer of granular material through which the fuel burns. Bed material holds and spreads the heat, keeps combustion steady and protects the distributor. Its size, hardness and chemistry decide how well the bed behaves and how often it needs topping up.
What makes a good bed material
- Particle size within the range your boiler is designed for
- Hardness, so it does not break down into fines that blow out
- A rounded shape for smooth fluidisation and less erosion
- Chemistry that resists sintering and clinkering with your fuel ash
- Consistent grading from one lot to the next
Refractory bed material
Crushed and graded refractory is widely used for start-up and regular top-up. It is economical and easy to supply in the size range a boiler needs. Its angular particles can wear down faster, so top-up tends to be more frequent.
Ceramic bed material
Ceramic bed material is made as hard, rounded sintered beads. It usually wears more slowly, loses less as fines and causes less erosion of in-bed tubes and refractory. It costs more per tonne, so the saving shows up in lower top-up and smoother running rather than in the purchase price.
Signs your bed material is not right
- Frequent top-up to hold bed pressure
- Clinker or lumps forming in the bed
- Uneven bed temperatures
- Faster erosion of in-bed tubes or refractory
- Excess fines in the fly ash
How to choose
Start from the size range in your boiler design and your fuel. If the fuel ash is prone to clinkering, chemistry matters as much as size. Compare the running cost per month, including how much you top up, not just the price per tonne.
JISPL makes refractory and ceramic bed material in our own units, graded to your boiler's particle size, and can supply regular quantities under an annual rate contract.
Send us the details and get a quick quotation or a site visit.